Spike Protein Antibodies Test Kit
Spike Protein Antibodies Test Kit
Classified In:Lateral Flow Rapid Test(Colloidal Gold)
Product Brief:
SARS-CoV-2 Spike Protein Antibodies Test Kit (Colloidal Gold)
The SARS-CoV-2 Spike Protein Antibodies Test is a colloidal gold used for qualitative
detection of Spike Protein Antibodies of SARS-CoV-2 in human Fingertip blood,
venipuncture whole blood, serum and plasma specimen.
The SARS-CoV-2 Spike Protein Antibodies are protective antibodies produced by the
human body after injection with SARS-CoV-2 vaccine or infection with SARS-CoV-2.
The test is intended as an aid to assess the adaptive humoral immune response to
the SARS-CoV-2.
For in vitro diagnostic use only. For professional use only
Product Specifications:
Test Method
Carefully read the reagent instruction before using the test kit and strictly operate
according to the instruction to ensure reliable results. Bring all reagents to room
temperature (18-28) before use.
(1) Prepare
(a) Remove the test sample and required reagents from storage conditions and
equilibrate to room temperature.
b) Remove the test card from the packaging bag and lay it flat on a dry surface.
(2) Sampling:
(a) Samples: Take 20 μL of samples and add them to the sample well, and vertically
add 3drops (about 80 μL) of sample diluent.
(b) After adding the sample, the positive sample can be detected within 15 minutes, it
is recommended that the final test results be recorded and recorded within 15-20

Explanation for Test Results

1) Positive Result: The presence of control line (C) and the test line (T) indicate a
positive result for the SARS-CoV-2 spike protein antibodies.
(2) Negative Result: The presence of only the control line (C) and no test line (T)
indicates a negative result.
(3) Invalid result: If the control line (C) is not visible after performing the test, the
result is considered invalid. The sample needs to be tested again, indicating that the
operation might be incorrect or the test card is deteriorated and damaged. In this
case, please read the instruction carefully again and retest with a new test card. If the
problem cannot be solved, you should stop using this batch of products immediately
and contact the supplier